Once you've decided on a new boiler, the worry usually moves on to the day itself: how long the house will be upside down, and how long you'll be without heating and hot water. As for how long a boiler installation takes, for most homes it's one working day. Swapping an old combi for a new one in the same spot is the quickest job we do, and it normally takes us four to eight hours. If we're converting you to a combi, moving the boiler or running new pipework, it can stretch to two days.
That's only the time we're actually in your house, though. From the first visit to a working boiler you're realistically looking at a couple of weeks, because the survey, the written quote and the booked date all have to happen first.
If you'd rather talk it through than read about it, ring us on 01226 885022 and Danny or I will happily go over how it would work for your house.
How long does a boiler installation take for each type of job?
What kind of job you're having done matters more than anything else. Here's roughly how the main ones compare, with the starting prices from our boiler installation service.
| Type of job | Usual time on site | Price from (inc. VAT) |
|---|---|---|
| Combi replaced with a new combi in the same place | One day, often at the shorter end of 4 to 8 hours | £1,600 |
| System or regular boiler converted to a combi | Up to two days | £2,400 |
| New system or regular boiler for a larger home | One to two days | £2,995 |
| Boiler moved to a new position | Longer than a straight swap, confirmed at the survey | Quoted after the survey |
Every one of those prices includes cleaning out your system, a magnetic filter, a smart thermostat and all the paperwork. The £1,600 combi swap comes with a five-year manufacturer warranty, and for £2,100 you get the full ten years, which is worth a serious look if you're planning to stay in the house for a good while. The rest of what we charge is on our pricing page.
The difference between a one-day job and a two-day job mostly comes down to pipework. A straight swap reuses the gas, water and heating pipes that are already in place, so most of the day goes on making careful connections and then testing them. A conversion is a bigger piece of work, because the hot water cylinder has to come out (often along with a tank in the loft) and the pipes get reworked so the new boiler can heat your water on demand. For anyone still choosing between them, our guide to combi vs system boilers goes through the trade-offs honestly.
The bit before we turn up: survey, quote and a date
The clock really starts with the survey, which is free, and either Danny or I will come out to see you in person. We don't price a boiler from a phone call, because you can't see a flue route or a tired bit of pipework down the phone. So we'll measure up, take photos, have a proper look at what's there already and work out where the flue can run.
You'll get a fixed price by email within a day of the survey, and nothing on it changes unless we've agreed it with you in writing first.
Once you've picked the brand and the warranty, we book a date, usually one to two weeks out, and order every part in advance so it's all sitting there waiting before we start. There's nothing more annoying for you than an engineer disappearing at lunchtime to hunt down a fitting, and ordering ahead is how we make sure that doesn't happen.
So from the survey to the day we turn up, you're usually looking at a week or two, and most of that is just waiting for your date to come round.
What happens on the day itself
Once we're through the door, the job usually runs like this:
- We cover your floors and carpets before a single tool comes out of the bag.
- The system gets drained down, the gas is isolated and the old boiler comes off the wall.
- The new mounting bracket goes up, then we make the gas, water, heating and condensate connections and fit the flue.
- We flush the whole system through, by power or chemical cleaning, and fit a magnetic filter to catch sludge before it can get anywhere near the new boiler.
- We refill the system, bring it back up to pressure and commission the new boiler.
- Last of all, the smart thermostat goes on (Hive, Nest or Tado, whichever you've chosen), we get it connected and show you around the app before we leave.
Commissioning is where we prove the new boiler is burning safely and doing what it should, so it's the one part of the day that's never worth hurrying, even if it means packing up half an hour later than we'd hoped.
What can make a boiler installation take longer?
Most of the things that push a job past one day get spotted before we start, and that's exactly why the survey matters so much.
Moving the boiler is the big one. A new position needs fresh pipe runs and a new route for the flue, and sometimes that means making a hole through an outside wall. A combi conversion is the other usual culprit, for the cylinder-and-tank reasons I mentioned earlier, and there's a fair bit of capping off old pipes once they're out.
Back boilers are a little project of their own. They're tucked away behind a gas fire, so the fire comes out with them, and the new boiler ends up somewhere else in the house entirely. If you have a look at the Google reviews on our installation page, you'll find one from a customer whose back boiler we took out and swapped for a combi in a new spot.
Then there's sludge. We flush every system, but one that's full of thick black sludge simply takes longer to get clean. Our article on power flush costs in Barnsley goes into what a heavily sludged system needs.
Whatever applies to your house, you'll know how long the job should take before we arrive, and if it's going to be two days, the quote will tell you so.
How long will you be without heating and hot water?
For the working day, plan on having neither while the old boiler's off the wall and the new one's going in. A two-day job can mean an evening without heating as well, so it's worth asking at the survey how the days will be split.
A bit of planning makes it far easier, especially in the middle of winter. Have your shower or bath the night before or first thing that morning, and fill the kettle and a flask before we drain the system down. For anyone at home who really feels the cold, an electric heater in one room makes a big difference on a chilly install day. And it's best to keep pets and little ones away from where we're working, because there'll be tools out and open pipes about.
Getting the house ready for us
There isn't much you need to do, but a few minutes of preparation saves time once we're there.
- If the boiler lives in a cupboard, empty it, and if it's up in the loft, clear a path to it.
- On a combi conversion we'll need to get at the airing cupboard and the loft above it as well.
- Leave a space to park if you can, because a van close to the house saves a lot of trips carrying heavy kit.
- Make sure someone's home at the start to let us in, and at the end so we can show you the controls.
Paperwork, certificates and a follow-up call
Once the boiler's running, you'll get everything that proves it was fitted properly. We fill in the benchmark checklist, register the manufacturer's warranty in your name and notify the work under the Building Regulations.
The Building Regulations side is the bit people tend to overlook. Because a Gas Safe registered engineer can self-certify heating work, you don't have to apply to the council yourself, and the government's page on self-certified building work says you should receive a certificate within 8 weeks of completion. Keep it somewhere safe, because it's your evidence that the work complies, and it'll come up in a solicitor's searches when you eventually sell.
Whoever you choose to fit your boiler, it's worth checking them on the Gas Safe Register first. Just search their number, and you're welcome to start with ours, which is 625881. And we don't vanish once the boiler's on, either. About a week after the install we'll give you a ring to check it's all working the way you want.
Booking a boiler installation in Barnsley
We're based in Manvers, on the Barnsley and Rotherham border, so anywhere from S70 to S75 is a short drive for us. We cover Sheffield, Rotherham, Doncaster and Wakefield as well, and our Barnsley area page lists the nearby places we work in.
Wherever you are on the patch, you'll get the same honest timings from us, and if it's a simple swap, we'll be aiming to have your heating back on before teatime.
Let's get a date in the diary
Everything above is the typical picture, but how long your boiler installation takes really depends on your house, and the free survey is what turns that into a firm date and a fixed price. If you'd like one booked in, get in touch or give us a call on 01226 885022 between 8am and 5pm on weekdays, and we'll find a time that suits you.
Frequently asked questions
How long is the warranty on a new boiler?
It's five or ten years, depending on which tier you go for. Because Ideal and Alpha Heating both approve us as installers, we can offer the longer ten-year manufacturer cover, which a standard installer can't. We handle the registration for you, and your cover starts from the day the boiler's fitted.
Does a new boiler need Building Regulations approval?
Yes, but it isn't something you have to sort out yourself. Heating work falls under the Building Regulations, and because we're Gas Safe registered we notify it through Gas Safe Register for you. Your certificate follows within 8 weeks of the job, and it's the document a solicitor will look for if you ever sell.
Is a smart thermostat included with a new boiler?
It is with us. Every installation includes a Hive, Nest or Tado thermostat as standard, so there's nothing extra to add on. We fit it, set it up on your phone and show you around the app before we leave, which means you're in charge of the heating from the very first evening.
When does a new boiler need its first service?
Book it in for a year after the install date and then every year after that, because a yearly service is what keeps the manufacturer warranty valid. Ours costs £80 for combi and system boilers alike and covers a full 14-point inspection and flue gas analysis. You'll get the certificate on the day, so keep it with the boiler's other paperwork.
Get more like this
One honest email a month.
Boiler tips, heat pump advice, and answers to the questions our customers actually ask.




